-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Book Excerpt: 'The Printed Circuit Designer's Guide to... Designing for Reality,' Chapter 2
January 4, 2024 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
This is an excerpt from Sunstone Circuit's book: The Printed Circuit Designer's Guide to... Designing for Reality by Matt Stevenson
Chapter 2: Variations in the Manufacturing Process
Once a CAD tool is chosen and the basics understood, the thought process should then shift toward the manufacturing of the PCB, before applying electrons to the screen. Let’s get the “bad news” out of the way first. Perfection is an unattainable goal. Don’t expect manufacturing to be perfect. There will always be variations from optimum at every step of every manufacturing process. Designers should recognize that variation and physical challenges within the PCB manufacturing process can be exacerbated by their design decisions. Not to worry, this is easily overcome with forethought during design and a good manufacturing partner.
According to the law of variation as defined in the Statistical Quality Control Handbook, 2nd Edition (January 1982):
- Everything varies. In other words, no two things are exactly alike.
- Groups of things from a constant system of causes tend to be predictable. If outcomes from systems can be predicted, then it follows that they can be anticipated and managed.
In a recent post for bizfluent, Beth Robinson identified the five main sources of process variation: raw materials, equipment, human actions, environment, and method.
Raw Materials
There will be variation in the output of all manufacturing processes and all suppliers.
The materials required in a manufacturing process come most often in either the form of a manufactured material or ore. These suppliers of manufactured material will experience variation during their production process, so there will inevitably be slight inconsistencies in the materials they supply. This can have a cascading effect, creating variations during PCB production and potentially impacting board performance. Raw materials like copper don’t always come from the same source, especially during times when supply chains are compromised (Figure 2.1). Manufacturers and designers may need to consider variations in purity and how they will affect the manufacturing outcome. There are specifications for most of these materials (copper cladding, laminate, etc.) that limit the variation to an agreed upon, acceptable range.
Continue reading the rest of this book at I-007eBooks.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.